- Art. 0400 - Router bits with cylindrical shank to drill and edge
- Art. 0403 - Router bits with cylindrical shank to drill and edge
- Art. 0405 - Router bits with morse-coneshank to drill and edge
- Art. 0410 - Multicut spiral router bits to drill and edge
- Art. 0415 - Multicut spiral router bits to edge
- Art. 0420 - Hw (integral tungsten carbide) helical router bits z=1
- Art. 0423 - Hw (integral tungsten carbide) helical router bits z=2
- Art. 0425 - Hw (integral tungsten carbide) helical router bits z=3
- Art. 0428 - Hw (integral tungsten carbide) helical router bits z=3 with chipbreaker
- Art. 0430 - Hw (integral tungsten carbide) helical router bits with pos. and neg. helix
- Art. 0435 - Hw (integral tungsten carbide) helical router bits for locks
- Art. 0440 - Profiled router bits for simple shapes
- Art. 0455 - Insert router cutters to drill and edge z=1 and z=1+1
- Art. 0460 - Insert router cutters to drill and edge z=2+1
- Art. 0465 - Insert router cutters to edge z=2 e z=2+2 ri
- Art. 0470 - Vari-angle bevelling insert router cutters
- Art. 0472 - Insert helical router cutters
- Art. 0475 - Insert router cutters simple shapes z=2
- Art. 0482 - Panel rising insert router cutters
- Art. 0485 - Multiprofile insert router cutters
- Art. 0490 - Insert router cutter set for solid wood door exec.
- Art. 0495 - Insert router cutter set for m.d.f. door exec.
- Art. 0497 - Insert router cutter set for doors execution
Art. 0423
Hw (integral tungsten carbide) helical router bits z=2
| Z=2 / HW | |||
| Cod. | D | B | Ltt. |
| 001 | 3 | 12 | 40 |
| 002 | 4 | 15 | 40 |
| 003 | 5 | 17 | 50 |
| 004 | 6 | 17 | 50 |
| 005 | 6 | 27 | 60 |
| 006 | 8 | 22 | 63 |
| 007 | 8 | 32 | 72 |
| 008 | 10 | 32 | 72 |
| 009 | 10 | 42 | 100 |
| 010 | 12 | 32 | 73 |
| 011 | 12 | 42 | 100 |
| 012 | 12 | 52 | 100 |
| 013 | 14 | 42 | 100 |
| 014 | 14 | 52 | 100 |
| 015 | 16 | 42 | 100 |
| 016 | 16 | 52 | 100 |
| 017 | 16 | 62 | 100 |
| 018 | 18 | 52 | 100 |
| 019 | 18 | 75 | 125 |
| 020 | 20 | 52 | 100 |
| 021 | 20 | 75 | 125 |
| INDICATE ROTATION SENSE AND THE HELIX TYPE (POSITIVE OR NEGATIVE) WHEN ORDERING | |||
Technical specification
FOR FINISHING OPERATIONS on soft and hard wood, M.D.F., chipboard, plywood HW (integral tungsten carbide) execution. Especially recommended for all working where drilling is most important. Suitable for execution on plastic materials. POSITIVE HELIX: expulsion of the chip upward, excellent finishing of lower side of panel, also suitable for blind button hole execution; NEGATIVE HELIX: expulsion of the chip downward, excellent finishing of upper side of panel
Application
- Router
G3 di Fantacci Giancarlo & C. S.r.l.
Loc. Drove 7/A - 53036 Poggibonsi - Siena - Italy - Tel. +39 0577 981011 / 983386 Fax +39 0577 982520 - 
E-mail: g3fantacci@g3fantacci.com - Sito italiano - English site - Russian site - 首页
P.I. e C.F. IT 00864380522 - C.C.I.A.A. SI 96614 - Vol. 11432 - Cap.Soc.€ 90.000 Int.Vers.
tnx.it - Siti Internet Poggibonsi - Siena