Router tools
- Art. 0400 - Router bits with cylindrical shank to drill and edge
- Art. 0403 - Router bits with cylindrical shank to drill and edge
- Art. 0405 - Router bits with morse-coneshank to drill and edge
- Art. 0410 - Multicut spiral router bits to drill and edge
- Art. 0411 -
- Art. 0415 - Multicut spiral router bits to edge
- Art. 0420 - Hw (integral tungsten carbide) helical router bits z=1
- Art. 0423 - Hw (integral tungsten carbide) helical router bits z=2
- Art. 0425 - Hw (integral tungsten carbide) helical router bits z=3
- Art. 0428 - Hw (integral tungsten carbide) helical router bits z=3 with chipbreaker
- Art. 0430 - Hw (integral tungsten carbide) helical router bits with pos. and neg. helix
- Art. 0435 - Hw (integral tungsten carbide) helical router bits for locks
- Art. 0440 - Profiled router bits for simple shapes
- Art. 0445 - Profiled router bits for complex shapes
- Art. 0450 - Straight router bits to be combined with art.0440-0445
- Art. 0455 - Insert router cutters to drill and edge z=1 and z=1+1
- Art. 0460 - Insert router cutters to drill and edge z=2+1
- Art. 0465 - Insert router cutters to edge z=2 e z=2+2 ri
- Art. 0470 - Vari-angle bevelling insert router cutters
- Art. 0473 - Insert router cutters simple and complex shapes z=1
- Art. 0475 - Insert router cutters simple shapes z=2
- Art. 0480 - Insert router cutters complex shapes z=2
- Art. 0485 - Multiprofile insert router cutters
- Art. 0490 - Insert router cutter set for solid wood door exec.
- Art. 0495 - Insert router cutter set for m.d.f. door exec.
Products > Router tools > Art. 0410
Art. 0410
Multicut spiral router bits to drill and edge
| Z=3 / Hc | |||
| Cod. | D | B | Att. |
| 001 | 20 | 45 | D=20 x 50 |
| 002 | 20 | 45 | D=12 x 35 |
| 003 | 20 | 45 | CM2 Fil.2 |
| 004 | 20 | 45 | CM2 M30X1, |
| 005 | 20 | 45 | CM3 M30X1, |
| Z=6 / Hc | |||
| Cod. | D | B | Att. |
| 006 | 20 | 45 | D=20 x 50 |
| 007 | 30 | 60 | CM2 Fil.2 |
| 008 | 30 | 60 | CM2 M30X1, |
| 009 | 30 | 60 | CM3 M30X1, |
| D=Maximum Diameter B=Cutting height in mm Att.=Shank in mm | |||
Technical specification
Router bits with 3/6 fractioned cutting edges in Hc (brazed tungsten carbide), positioned on a spiral design.This execution allows a remarkable noise and energy reduction and permits a considerable increase of feed speed.Suitable for plunging and drilling operations, on soft and hard wood, plywood.
Application
- Router
G3 di Fantacci Giancarlo & C. S.r.l.
Loc. Drove 7/A - 53036 Poggibonsi - Siena - Italy - Tel. +39 0577 981011 / 983386 Fax +39 0577 982520 - 
E-mail: g3fantacci@g3fantacci.com - Sito italiano - English site - Russian site
tnx.it - Siti Internet Poggibonsi - Siena