Art. 0122
Hydro system - multicut spiral cutters for planing

Art. 0122 - Hydro system - multicut spiral cutters for planing

Z=12 / Hc
Cod. D B d Z
001 125 80 40-50 12
002 125 120 40-50 12
003 125 160 40-50 12
004 125 180 40-50 12
005 125 230 40-50 12
006 125 260 40-50 12
Z=16 / Hc
Cod. D B d Z
007 140 80 40-50 16
008 140 120 40-50 16
009 140 160 40-50 16
010 140 180 40-50 16
011 140 230 40-50 16
012 140 260 40-50 16
Z=20 / Hc
Cod. D B d Z
013 163 80 40-50 20
014 163 120 40-50 20
015 163 160 40-50 20
016 163 180 40-50 20
017 163 230 40-50 20
018 163 260 40-50 20
D=Maximum Diameter  B=Cutting height in mm  d=Bore in mm  Z=Number of cutting edges  
SAME PRICE FOR OTHER BORE SIZES EXECUTION - NOT READY ON STOCK
SPARE PARTS
Cod. Description Rif. Pos.
1085 001 HYDRO TOOLS ACCESSOIRES GREASE CARTRIDGE 1
1085 002 HYDRO TOOLS ACCESSOIRES GREASE NIPPLES WITH STEEL RUBBER WASHER 2
1085 003 HYDRO TOOLS ACCESSOIRES RELEASE VALVE WITH STELL RUBBER WASHER 3
1085 004 HYDRO TOOLS ACCESSOIRES GREASE GUN 4

Technical specification

cutter with n.12/16/20 fractioned cutting wings in Hc (brazed tungsten carbide), positioned on a spiral design, with two starting helicies. The Hydro system, thanks to the grease, injected at high pressure (350 BAR) through the pump, inside to the expansion chambers, allows a perfect concentric locking of the tool on the spindle, avoiding any tollerance. Suitable for soft and hard timbers and glued panels.

Application

  • Moulder