Art. 0105
Multicut spiral cutters for planing z=12 extra light version

Art. 0105 - Multicut spiral cutters for planing z=12 extra light version

Z=12 / Hc
Cod. D B d Z
001 100 120 30-35-40-50 12
002 100 180 31-35-40-50 12
004 125 80 33-35-40-50 12
006 125 120 35-35-40-50 12
008 125 150 37-35-40-50 12
010 125 180 39-35-40-50 12
011 125 230 40-35-40-50 12
012 140 120 42-35-40-50 12
013 140 150 43-35-40-50 12
014 140 180 44-35-40-50 12
015 140 230 45-35-40-50 12
017 125 220 41-35-40-50 12
101 125 100 46-35-40-50 12
102 125 130 47-35-40-50 12
103 125 160 48-35-40-50 12
104 125 190 49-35-40-50 12
105 125 200 50-35-40-50 12
106 125 210 51-35-40-50 12
107 125 240 52-35-40-50 12
108 125 250 53-35-40-50 12
109 125 260 54-35-40-50 12
110 140 80 55-35-40-50 12
111 140 100 56-35-40-50 12
112 140 130 57-35-40-50 12
113 140 160 58-35-40-50 12
114 140 190 59-35-40-50 12
115 140 200 60-35-40-50 12
116 140 210 61-35-40-50 12
117 140 240 62-35-40-50 12
118 140 250 63-35-40-50 12
119 140 260 64-35-40-50 12
D=Maximum Diameter  B=Cutting height in mm  d=Bore in mm  Z=Number of cutting edges  
With chambers execution: 5% price increase; with cut limiting device execution 10% price increase
SAME PRICE FOR OTHER BORE SIZES EXECUTION - NOT READY ON STOCK

Technical specification

Cutter with n.12 fractioned cutting wings in Hc (brazed tungsten carbide), positioned on a spiral design, with two starting helicies. The cutter permits high feed speed and great wood removal with good surface finishing. The light structure of the tool (steel body lightened until 50%) allows a remarkable reduction of the machine stress. Suitable for soft and hard timbers and glued panels

Application

  • Moulder
  • Spindle moulder (only with cut limitng device)