Inserts and knives
- Art. 0505 - Hs (hss) serrated back knives
- Art. 0510 - Steel planing knives
- Art. 0515 - Hc (brazed tungsten carbide) planing knives
- Art. 0520 - Hw (integral tungsten carbide) reversible inserts
- Art. 0525 - Hw (integral tungsten carbide) micrograin reversible inserts
- Art. 0530 - Hw (integral tungsten carbide) inclined reversible inserts
- Art. 0535 - Hw (integral tungsten carbide) reversible inserts with bevelled angles
- Art. 0540 - Hw (integral tungsten carbide) square spurs
- Art. 0541 - Hw (integral tungsten carbide) rhomboidal spurs
- Art. 0542 - Hw (integral tungsten carbide) triangular spurs
- Art. 0543 - Hw (integral tungsten carbide) inserts for grooving cutters
- Art. 0544 - Hw (integral tungsten carbide) ambidextrous chamfers
- Art. 0545 - Hw (integral tungsten carbide) ambidextrous radius shavers
- Art. 0546 - Hw (integral tungsten carbide) ambidextrous inserts for gasket groove
- Art. 0550 - Hw (integral tungsten carbide) profiled inserts 1,5 mm thick.
- Art. 0560 - Hw (integral tungsten carbide) profiled inserts - 2mm thick. -simple shape-
- Art. 0565 - Hw (integral tungsten carbide) profiled inserts - 2 mm thick. -complex shape
- Art. 0575 - Hs (hss) cups for copying lathe
- Art. 0580 - Hs (hss) plates for copying lathe
Products > Inserts and knives > Art. 0525
Art. 0525
Hw (integral tungsten carbide) micrograin reversible inserts
| COLTELL. REVERSIBILI IN HW (HM integrale) MICROGRANO PLUSZ =2 | |||
| Cod. | B | L | H |
| 005 | 1,5 | 12 | 12 |
| 006 | 1,5 | 20 | 12 |
| 007 | 1,5 | 30 | 12 |
| 008 | 1,5 | 50 | 12 |
| COLTELL. REVERSIBILI IN HW (HM integrale) MICROGRANO ULTRA Z=2 | |||
| Cod. | B | L | H |
| 009 | 1,5 | 12 | 12 |
| 010 | 1,5 | 20 | 12 |
| 011 | 1,5 | 30 | 12 |
| 012 | 1,5 | 50 | 12 |
| COLTELL. REVERSIBILI IN HW (HM integrale) MICROGRANO Z=2 | |||
| Cod. | B | L | H |
| 001 | 1,5 | 12 | 12 |
| 002 | 1,5 | 20 | 12 |
| 003 | 1,5 | 30 | 12 |
| 004 | 1,5 | 50 | 12 |
| B=Cutting height in mm L=Lenght in mm H=Height in mm | |||
Technical specification
HW (integral tungsten carbide) micrograin inserts with two cutting edges with 35° clearance.The highly reduced micrograin particles grant an homogeneus structure of the sintered, allowing greater resistance to use than the standard quality.Suitable for M.D.F , melamine coated, chipboards and laminates.
G3 di Fantacci Giancarlo & C. S.r.l.
Loc. Drove 7/A - 53036 Poggibonsi - Siena - Italy - Tel. +39 0577 981011 / 983386 Fax +39 0577 982520 - 
E-mail: g3fantacci@g3fantacci.com - Sito italiano - English site - Russian site
tnx.it - Siti Internet Poggibonsi - Siena