Insert cutters
- Art. 0300 - Insert profiled cutters for simple shapes
- Art. 0308 - Profile and counter profile insert cutter set
- Art. 0310 - Profile and counter profile insert cutter set
- Art. 0315 - Panel rising insert cutters- 12 profiles
- Art. 0317 - Panel rising insert cutters - 12 profiles
- Art. 0319 - Teste portacoltelli per piattabanda
- Art. 0320 - Insert bevel cutters
- Art. 0321 - Adjus. bevels insert cutters - with ring nut
- Art. 0322 - Adjus. bevels insert cutters
- Art. 0325 - Insert joint cutters
- Art. 0328 - Insert joint cutters
- Art. 0330 - Insert joint cutters
- Art. 0332 - Adjus. insert joint cutters
- Art. 0335 - Straight profile – insert grooving cutters
- Art. 0340 - Adjus. insert grooving cutters
- Art. 0343 - Adjus. insert grooving cutters
- Art. 0344 - Insert rebate cutters with straight or shear cutting angles
- Art. 0345 - Rebate spiral insert cutters
- Art. 0350 - Edge bander insert cutters
- Art. 0355 - Pre-planing insert grooving cutter set for guiding groovers
- Art. 0360 - Insert spiral planing cutters - light alloy body
- Art. 0370 - Insert spiral planing cutters - light alloy body
- Art. 0371 - Hydro system - insert planing cutters- steel body
- Art. 0375 - Serrated back cutter block
- Art. 0376 - Hydro system - serrated back insert cutters
- Art. 0378 - Cutter holder for copying lathes- steel body
- Art. 0380 - Panelling and flooring insert cutter set
- Art. 0385 - Insert cutter set for single tenon. machine
- Art. 0390 - Insert cutter set for tenon. machine
- Art. 0394 - Insert cutter set for double tenon. machine
- Art. 0395 - Insert cutter set for double tenon. machine
Products > Insert cutters > Art. 0394
Art. 0394
Insert cutter set for double tenon. machine
| Z=3/3 / HW | |||||||
| Cod. | D/D1 | B/B1 | Ri | Sg45° | Reg. | d | Rot. |
| 001 | 80/60 | 35/30 | 6 | 3 | 01/10/35 | 25 | Dx/RH |
| 002 | 80/60 | 35/30 | 6 | 3 | 01/10/35 | 25 | Sx/LH |
| D/D1=Diametro fresa/ diametro truciolatore B/B1=Spessore fresa/ spessore truciolatore Ri=Number of spurs Sg45°=Number of chamfers 45° Reg.=Regulation in mm d=Bore in mm Rot.=Rotation sense | |||||||
| SPECIFY THE BRAND OF THE MACHINE WHEN ORDERING | |||||||
| SPARE PARTS | |||||
| Cod. | Description | Rif. | Pos. | ||
| 0394 | 010 | HW hexagonal spurs 18,9 X 7,9 X 4 | a | ||
| 0394 | 011 | HW reversible inserts 32 x 8 x 1,5 | b | ||
| 0394 | 012 | Hw profiled inserts 30 x 18,5 x 2 | c | ||
Technical specification
cutter set with HW (integral tungsten carbide)reversible inserts,composed of one hogger Z=3 + 3 Ri + 3 Sp45° and one cutter Z=3 + 3 Ri, permitting a tenon adjustment from 5 to 40mm.Suitable for machines : BALESTRINI,BACCI, GREDA, PADE
Application
- Double tenoning machine
G3 di Fantacci Giancarlo & C. S.r.l.
Loc. Drove 7/A - 53036 Poggibonsi - Siena - Italy - Tel. +39 0577 981011 / 983386 Fax +39 0577 982520 - 
E-mail: g3fantacci@g3fantacci.com - Sito italiano - English site - Russian site - 首页
P.I. e C.F. IT 00864380522 - C.C.I.A.A. SI 96614 - Vol. 11432 - Cap.Soc.€ 90.000 Int.Vers.
tnx.it - Siti Internet Poggibonsi - Siena