Insert cutters
- Art. 0300 - Insert profiled cutters for simple shapes
- Art. 0305 - Insert profiled cutters for complex shapes
- Art. 0308 - Profile and counter profile insert cutter set
- Art. 0310 - Profile and counter profile insert cutter set
- Art. 0315 - Panel rising insert cutters- 12 profiles
- Art. 0317 - Panel rising insert cutters- 12 profiles
- Art. 0319 - Teste portacoltelli per piattabanda
- Art. 0320 - Insert bevel cutters
- Art. 0321 - Adjus. bevels insert cutters - with ring nut
- Art. 0322 - Adjus. bevels insert cutters
- Art. 0325 - Insert joint cutters
- Art. 0328 - Insert joint cutters
- Art. 0330 - Insert joint cutters
- Art. 0332 - Adjus. insert joint cutters
- Art. 0335 - Straight profile - insert grooving cutters
- Art. 0340 - Adjus. insert grooving cutters
- Art. 0343 - Adjus. insert grooving cutters
- Art. 0344 - Insert rebate cutters with straight or shear cutting angles
- Art. 0345 - Rebate spiral insert cutters
- Art. 0350 - Edge bander insert cutters
- Art. 0355 - Pre-planing insert grooving cutter set for guiding groovers
- Art. 0360 - Insert spiral planing cutters - light alloy body
- Art. 0370 - Insert spiral planing cutters - light alloy body
- Art. 0371 - Hydro system - insert planing cutters- steel body
- Art. 0375 - Serrated back cutter block
- Art. 0376 - Hydro system - serrated back insert cutters
- Art. 0378 - Cutter holder for copying lathes- steel body
- Art. 0380 - Panelling and flooring insert cutter set
- Art. 0385 - Insert cutter set for single tenon. machine
- Art. 0390 - Insert cutter set for tenon. machine
- Art. 0394 - Insert cutter set for double tenon. machine
- Art. 0395 - Insert cutter set for double tenon. machine
Products > Insert cutters > Art. 0376
Art. 0376
Hydro system - serrated back insert cutters
| Z=10 / HS | ||||
| Cod. | D | B | d | Z |
| 038 | 215 | 60 | 50 | 10 |
| 039 | 215 | 100 | 50 | 10 |
| 040 | 215 | 130 | 50 | 10 |
| 041 | 215 | 150 | 50 | 10 |
| Z=4 / HS | ||||
| Cod. | D | B | d | Z |
| 001 | 137 | 60 | 40 | 4 |
| 002 | 137 | 100 | 40 | 4 |
| 003 | 137 | 130 | 40 | 4 |
| 004 | 150 | 60 | 50 | 4 |
| 005 | 150 | 100 | 50 | 4 |
| 006 | 150 | 130 | 50 | 4 |
| 007 | 150 | 150 | 50 | 4 |
| 008 | 150 | 180 | 50 | 4 |
| 009 | 150 | 230 | 50 | 4 |
| 010 | 150 | 260 | 50 | 4 |
| 011 | 150 | 310 | 50 | 4 |
| 012 | 163 | 60 | 50 | 4 |
| 013 | 163 | 100 | 50 | 4 |
| 014 | 163 | 130 | 50 | 4 |
| 015 | 163 | 150 | 50 | 4 |
| 016 | 163 | 230 | 50 | 4 |
| 017 | 163 | 260 | 50 | 4 |
| 018 | 163 | 310 | 50 | 4 |
| Z=6 / HS | ||||
| Cod. | D | B | d | Z |
| 019 | 150 | 60 | 50 | 6 |
| 020 | 150 | 100 | 50 | 6 |
| 021 | 150 | 130 | 50 | 6 |
| 022 | 150 | 150 | 50 | 6 |
| 023 | 150 | 180 | 50 | 6 |
| 024 | 150 | 230 | 50 | 6 |
| 025 | 150 | 260 | 50 | 6 |
| 026 | 150 | 310 | 50 | 6 |
| 027 | 163 | 60 | 50 | 6 |
| 028 | 163 | 100 | 50 | 6 |
| 029 | 163 | 130 | 50 | 6 |
| 030 | 163 | 150 | 50 | 6 |
| 031 | 163 | 230 | 50 | 6 |
| 032 | 163 | 260 | 50 | 6 |
| 033 | 163 | 310 | 50 | 6 |
| Z=8 / HS | ||||
| Cod. | D | B | d | Z |
| 034 | 195 | 60 | 50 | 8 |
| 035 | 195 | 100 | 50 | 8 |
| 036 | 195 | 130 | 50 | 8 |
| 037 | 195 | 150 | 50 | 8 |
| D=Maximum Diameter B=Cutting height in mm d=Bore in mm Z=Number of cutting edges | ||||
| KNIVES ARE NOT INCLUDED | ||||
| SPARE PARTS | |||||
| Cod. | Description | Rif. | Pos. | ||
| 1085 | 001 | HYDRO TOOLS ACCESSOIRES | GREASE CARTRIDGE | 1 | |
| 1085 | 002 | HYDRO TOOLS ACCESSOIRES | GREASE NIPPLES WITH STEEL RUBBER WASHER | 2 | |
| 1085 | 003 | HYDRO TOOLS ACCESSOIRES | RELEASE VALVE WITH STELL RUBBER WASHER | 3 | |
| 1085 | 004 | HYDRO TOOLS ACCESSOIRES | GREASE GUN | 4 | |
| 505 | |||||
Technical specification
insert cutter with 4/6/8/10/12 HS(HSS) or Hc(brazed tungsten carbide) knives.The Hydro system, thanks to the grease injected at high pressure (350 BAR) through a pump, inside the expansion chambers, allows a perfect concentric locking of the tool on the spindle, avoiding any tolerance. The cutter permits the highest feed speed and great wood removal with good surface finishing.Suitable for soft and hard timbers and glued panels.
Application
- Moulder
G3 di Fantacci Giancarlo & C. S.r.l.
Loc. Drove 7/A - 53036 Poggibonsi - Siena - Italy - Tel. +39 0577 981011 / 983386 Fax +39 0577 982520 - 
E-mail: g3fantacci@g3fantacci.com - Sito italiano - English site - Russian site
tnx.it - Siti Internet Poggibonsi - Siena