Insert cutters
- Art. 0300 - Insert profiled cutters for simple shapes
- Art. 0305 - Insert profiled cutters for complex shapes
- Art. 0308 - Profile and counter profile insert cutter set
- Art. 0310 - Profile and counter profile insert cutter set
- Art. 0315 - Panel rising insert cutters- 12 profiles
- Art. 0317 - Panel rising insert cutters- 12 profiles
- Art. 0319 - Teste portacoltelli per piattabanda
- Art. 0320 - Insert bevel cutters
- Art. 0321 - Adjus. bevels insert cutters - with ring nut
- Art. 0322 - Adjus. bevels insert cutters
- Art. 0325 - Insert joint cutters
- Art. 0328 - Insert joint cutters
- Art. 0330 - Insert joint cutters
- Art. 0332 - Adjus. insert joint cutters
- Art. 0335 - Straight profile - insert grooving cutters
- Art. 0340 - Adjus. insert grooving cutters
- Art. 0343 - Adjus. insert grooving cutters
- Art. 0344 - Insert rebate cutters with straight or shear cutting angles
- Art. 0345 - Rebate spiral insert cutters
- Art. 0350 - Edge bander insert cutters
- Art. 0355 - Pre-planing insert grooving cutter set for guiding groovers
- Art. 0360 - Insert spiral planing cutters - light alloy body
- Art. 0370 - Insert spiral planing cutters - light alloy body
- Art. 0371 - Hydro system - insert planing cutters- steel body
- Art. 0375 - Serrated back cutter block
- Art. 0376 - Hydro system - serrated back insert cutters
- Art. 0378 - Cutter holder for copying lathes- steel body
- Art. 0380 - Panelling and flooring insert cutter set
- Art. 0385 - Insert cutter set for single tenon. machine
- Art. 0390 - Insert cutter set for tenon. machine
- Art. 0394 - Insert cutter set for double tenon. machine
- Art. 0395 - Insert cutter set for double tenon. machine
Products > Insert cutters > Art. 0375
Art. 0375
Serrated back cutter block
| Z=4 / HS | |||
| Cod. | D | B | d |
| 001 | 122 | 40 | 30-35-40 |
| 002 | 122 | 60 | 30-35-40 |
| 003 | 122 | 80 | 30-35-40 |
| 004 | 122 | 100 | 30-35-40 |
| 005 | 122 | 130 | 30-35-40 |
| 006 | 122 | 150 | 30-35-40 |
| 007 | 122 | 180 | 30-35-40 |
| 008 | 122 | 230 | 30-35-40 |
| 009 | 137 | 60 | 50 |
| 010 | 137 | 100 | 50 |
| 011 | 137 | 130 | 50 |
| 012 | 137 | 150 | 50 |
| 013 | 137 | 180 | 50 |
| 014 | 137 | 230 | 50 |
| 015 | 137 | 260 | 50 |
| 016 | 137 | 310 | 50 |
| D=Maximum Diameter B=Cutting height in mm d=Bore in mm | |||
| KNIVES ARE NOT INCLUDED | |||
| SPARE PARTS | |||||
| Cod. | Description | Rif. | Pos. | ||
| 505 | |||||
Technical specification
insert cutter with high resistant steel body and n. 4 HS(HSS) serrated back knives, thickness 8 mm,set on serrated seats .The tool is suitable for profiling working on soft, hard , glued wood etc...
Application
- Moulder
G3 di Fantacci Giancarlo & C. S.r.l.
Loc. Drove 7/A - 53036 Poggibonsi - Siena - Italy - Tel. +39 0577 981011 / 983386 Fax +39 0577 982520 - 
E-mail: g3fantacci@g3fantacci.com - Sito italiano - English site - Russian site
tnx.it - Siti Internet Poggibonsi - Siena