Brazed cutters
- Art. 0005 - Profiled cutters for simple shapes
- Art. 0006 -
- Art. 0010 - Profiled cutters for complex shapes
- Art. 0015 - Profile and counter profile cutter set
- Art. 0020 - Panel rising cutters
- Art. 0025 - Bevel cutters
- Art. 0030 - Joint cutters
- Art. 0035 - Joint cutters
- Art. 0040 - Adjus. joint cutters
- Art. 0045 - Adjus. joint cutters
- Art. 0050 - Grooving cutters
- Art. 0055 - Pre-planing grooving cutter set for guiding groovers
- Art. 0060 - Adjus. grooving cutters
- Art. 0065 - Rebate cutters with straight or shear angles
- Art. 0070 - Panelling and flooring cutter set
- Art. 0075 - Cutter set with shaver for single tenon. machine
- Art. 0080 - Cutter set for single tenon. machine
- Art. 0085 - Cutter set for double tenon. machine
- Art. 0090 - Cutter set with multicut shaver for double tenon. machine
Products > Brazed cutters > Art. 0035
Art. 0035
Joint cutters
| Z=4 / Hc | |||||
| Cod. | D | B | P | A | H |
| 001 | 140 | 25 | 8 | 8 | 8 |
| 002 | 140 | 40 | 8 | 8 | 16 |
| 003 | 140 | 50 | 8 | 8 | 24 |
| 004 | 140 | 40 | 7 | 10 | 21 |
| 005 | 140 | 50 | 7 | 10 | 28 |
| 006 | 140 | 60 | 7 | 10 | 35 |
| 007 | 140 | 80 | 7 | 10 | 49 |
| D=Maximum Diameter B=Cutting height in mm P=Joint pitch in mm A=Joint deep in mm H=Height in mm | |||||
| - with cut limiting device execution 15% price increase | |||||
| INDICATE ROTATION SENSE WHEN ORDERING | |||||
Technical specification
Cutters for not deep joints.Hc (brazed tungsten carbide) execution for abrasive,hard,soft and glued woods,MDF,plywood
Application
- Moulder
- Spindle moulder
G3 di Fantacci Giancarlo & C. S.r.l.
Loc. Drove 7/A - 53036 Poggibonsi - Siena - Italy - Tel. +39 0577 981011 / 983386 Fax +39 0577 982520 - 
E-mail: g3fantacci@g3fantacci.com - Sito italiano - English site - Russian site
tnx.it - Siti Internet Poggibonsi - Siena