Bits
- Art. 0600 - Hs carving bits flat bottom z=1
- Art. 0602 - Hs carving bits round bottom z=1
- Art. 0605 - Hs carving bits flat bottom z=2
- Art. 0608 - Hs carving bits round bottom z=2
- Art. 0610 - Hs carving bits arrow bottom
- Art. 0612 - Hs carving bits spoon shaped bottom
- Art. 0615 - Hs cylindrical carving bits
- Art. 0618 - Hw/hc carving bits flat bottom
- Art. 0620 - Hw/hc carving bits round bottom
- Art. 0625 - Hs profiled carving bits for simple shape
- Art. 0628 - Hs profiled carving bits for complex shape
- Art. 0630 - Hs flat bottom fingers
- Art. 0635 - Hs round bottom fingers
- Art. 0638 - Hs arrow bottom fingers
- Art. 0640 - Mortising bits z=2
- Art. 0642 - Mortising bits z=4
- Art. 0645 - Mortising bits z=3
- Art. 0648 - Adjus. mortising bits z=3 with countersink
- Art. 0650 - Spiral mortising bits to drill for deep bores
- Art. 0651 - Spiral mortising bits to drill
- Art. 0652 - Hinge mortising bits
- Art. 0655 - Buttonhole drill bits for slotting machine
- Art. 0658 - Swallow-tailed bits
- Art. 0660 - Countersink adaptor
- Art. 0662 - Countersink adaptor
- Art. 0665 - Countersink adaptor
- Art. 0668 - Spiral drill bits for small holes
- Art. 0670 - Drill bits without countersink
- Art. 0672 - Drill bits without countersink
- Art. 0675 - Drill bits with countersink
- Art. 0678 - Drill bits with countersink
- Art. 0680 - Hinge drill bits
- Art. 0682 - Hinge drill bits
- Art. 0685 - Hinge drill bits
- Art. 0687 - Drill bit adaptors
- Art. 0688 - Drill bit adaptors
- Art. 0690 - Slot dowel drill bits
- Art. 0692 - Countersink adaptor
- Art. 0694 - Slot dowel drill bits
- Art. 0696 - Through hole dowel drill bits
- Art. 0698 - Countersink for dowel drill bit
Art. 0690
Slot dowel drill bits
| Z=2+2 Ri / HS | |||
| Cod. | D | Rot. | Att. |
| 001 | 6 | Dx/RH | D=10 X 20 |
| 002 | 6 | Sx/LH | D=10 X 20 |
| 003 | 6 | Dx/RH | D=10 X 20 |
| 004 | 6 | Sx/LH | D=10 X 20 |
| 005 | 6 | Dx/RH | D=10 X 20 |
| 006 | 6 | Sx/LH | D=10 X 20 |
| 007 | 8 | Dx/RH | D=10 X 20 |
| 008 | 8 | Sx/LH | D=10 X 20 |
| 009 | 8 | Dx/RH | D=10 X 20 |
| 010 | 8 | Sx/LH | D=10 X 20 |
| 011 | 8 | Dx/RH | D=10 X 20 |
| 012 | 8 | Sx/LH | D=10 X 20 |
| 013 | 10 | Dx/RH | D=10 X 20 |
| 014 | 10 | Sx/LH | D=10 X 20 |
| 015 | 10 | Dx/RH | D=10 X 20 |
| 016 | 10 | Sx/LH | D=10 X 20 |
| 017 | 10 | Dx/RH | D=10 X 20 |
| 018 | 10 | Sx/LH | D=10 X 20 |
| 019 | 12 | Dx/RH | D=10 X 20 |
| 020 | 12 | Sx/LH | D=10 X 20 |
| 021 | 12 | Dx/RH | D=10 X 20 |
| 022 | 12 | Sx/LH | D=10 X 20 |
| 023 | 12 | Dx/RH | D=10 X 20 |
| 024 | 12 | Sx/LH | D=10 X 20 |
| 025 | 14 | Dx/RH | D=10 X 20 |
| 026 | 14 | Sx/LH | D=10 X 20 |
| 027 | 14 | Dx/RH | D=10 X 20 |
| 028 | 14 | Sx/LH | D=10 X 20 |
| 029 | 14 | Dx/RH | D=10 X 20 |
| 030 | 14 | Sx/LH | D=10 X 20 |
| D=Maximum Diameter Rot.=Rotation sense Att.=Shank in mm | |||
| INDICATE ROTATION SENSE WHEN ORDERING | |||
Technical specification
bits with two spiral cuts, 2 spurs and central tip.for precision holes execution, with depth adjustment through connection with countersink art. 0692.HS(HSS) for non glued soft and hard wood.
Application
- Boring machine
G3 di Fantacci Giancarlo & C. S.r.l.
Loc. Drove 7/A - 53036 Poggibonsi - Siena - Italy - Tel. +39 0577 981011 / 983386 Fax +39 0577 982520 - 
E-mail: g3fantacci@g3fantacci.com - Sito italiano - English site - Russian site
tnx.it - Siti Internet Poggibonsi - Siena