Bits
- Art. 0600 - Hs carving bits flat bottom z=1
- Art. 0602 - Hs carving bits round bottom z=1
- Art. 0605 - Hs carving bits flat bottom z=2
- Art. 0608 - Hs carving bits round bottom z=2
- Art. 0610 - Hs carving bits arrow bottom
- Art. 0612 - Hs carving bits spoon shaped bottom
- Art. 0615 - Hs cylindrical carving bits
- Art. 0618 - Hw/hc carving bits flat bottom
- Art. 0620 - Hw/hc carving bits round bottom
- Art. 0625 - Hs profiled carving bits for simple shape
- Art. 0628 - Hs profiled carving bits for complex shape
- Art. 0630 - Hs flat bottom fingers
- Art. 0635 - Hs round bottom fingers
- Art. 0638 - Hs arrow bottom fingers
- Art. 0640 - Mortising bits z=2
- Art. 0642 - Mortising bits z=4
- Art. 0645 - Mortising bits z=3
- Art. 0648 - Adjus. mortising bits z=3 with countersink
- Art. 0650 - Spiral mortising bits to drill for deep bores
- Art. 0651 - Spiral mortising bits to drill
- Art. 0652 - Hinge mortising bits
- Art. 0655 - Buttonhole drill bits for slotting machine
- Art. 0658 - Swallow-tailed bits
- Art. 0660 - Countersink adaptor
- Art. 0662 - Countersink adaptor
- Art. 0665 - Countersink adaptor
- Art. 0668 - Spiral drill bits for small holes
- Art. 0670 - Drill bits without countersink
- Art. 0672 - Drill bits without countersink
- Art. 0675 - Drill bits with countersink
- Art. 0678 - Drill bits with countersink
- Art. 0680 - Hinge drill bits
- Art. 0682 - Hinge drill bits
- Art. 0685 - Hinge drill bits
- Art. 0687 - Drill bit adaptors
- Art. 0688 - Drill bit adaptors
- Art. 0690 - Slot dowel drill bits
- Art. 0692 - Countersink adaptor
- Art. 0694 - Slot dowel drill bits
- Art. 0696 - Through hole dowel drill bits
- Art. 0698 - Countersink for dowel drill bit
Art. 0660
Countersink adaptor
| Z=2 / Hc | ||
| Cod. | D | Rot. |
| 021 | 3 | Dx/RH |
| 022 | 3 | Sx/LH |
| 023 | 3,5 | Dx/RH |
| 024 | 3,5 | Sx/LH |
| 025 | 4 | Dx/RH |
| 026 | 4 | Sx/LH |
| 027 | 4,5 | Dx/RH |
| 028 | 4,5 | Sx/LH |
| 029 | 5 | Dx/RH |
| 030 | 5 | Sx/LH |
| Z=2 / HS | ||
| Cod. | D | Rot. |
| 001 | 3 | Dx/RH |
| 002 | 3 | Sx/LH |
| 003 | 3,5 | Dx/RH |
| 004 | 3,5 | Sx/LH |
| 005 | 4 | Dx/RH |
| 006 | 4 | Sx/LH |
| 007 | 4,5 | Dx/RH |
| 008 | 4,5 | Sx/LH |
| 009 | 5 | Dx/RH |
| 010 | 5 | Sx/LH |
| D=Maximum Diameter Rot.=Rotation sense | ||
| INDICATE DIMENSION | ||
Technical specification
Countersink with 2 cutting edges head grinded.To be used with Art.0668 for the simultaneous execution of variable depth bores and countersinks.HS(HSS) for non glued soft and hard wood.Hc(brazed tungsten carbide) for natural wood, wood by-products , laminated panels ect…
Application
- Boring machine
G3 di Fantacci Giancarlo & C. S.r.l.
Loc. Drove 7/A - 53036 Poggibonsi - Siena - Italy - Tel. +39 0577 981011 / 983386 Fax +39 0577 982520 - 
E-mail: g3fantacci@g3fantacci.com - Sito italiano - English site - Russian site
tnx.it - Siti Internet Poggibonsi - Siena