Bits
- Art. 0600 - Hs carving bits flat bottom z=1
- Art. 0602 - Hs carving bits round bottom z=1
- Art. 0605 - Hs carving bits flat bottom z=2
- Art. 0608 - Hs carving bits round bottom z=2
- Art. 0610 - Hs carving bits arrow bottom
- Art. 0612 - Hs carving bits spoon shaped bottom
- Art. 0615 - Hs cylindrical carving bits
- Art. 0618 - Hw/hc carving bits flat bottom
- Art. 0620 - Hw/hc carving bits round bottom
- Art. 0625 - Hs profiled carving bits for simple shape
- Art. 0628 - Hs profiled carving bits for complex shape
- Art. 0630 - Hs flat bottom fingers
- Art. 0635 - Hs round bottom fingers
- Art. 0638 - Hs arrow bottom fingers
- Art. 0640 - Mortising bits z=2
- Art. 0642 - Mortising bits z=4
- Art. 0645 - Mortising bits z=3
- Art. 0648 - Adjus. mortising bits z=3 with countersink
- Art. 0650 - Spiral mortising bits to drill for deep bores
- Art. 0651 - Spiral mortising bits to drill
- Art. 0652 - Hinge mortising bits
- Art. 0655 - Buttonhole drill bits for slotting machine
- Art. 0658 - Swallow-tailed bits
- Art. 0660 - Countersink adaptor
- Art. 0662 - Countersink adaptor
- Art. 0665 - Countersink adaptor
- Art. 0668 - Spiral drill bits for small holes
- Art. 0670 - Drill bits without countersink
- Art. 0672 - Drill bits without countersink
- Art. 0675 - Drill bits with countersink
- Art. 0678 - Drill bits with countersink
- Art. 0680 - Hinge drill bits
- Art. 0682 - Hinge drill bits
- Art. 0685 - Hinge drill bits
- Art. 0687 - Drill bit adaptors
- Art. 0688 - Drill bit adaptors
- Art. 0690 - Slot dowel drill bits
- Art. 0692 - Countersink adaptor
- Art. 0694 - Slot dowel drill bits
- Art. 0696 - Through hole dowel drill bits
- Art. 0698 - Countersink for dowel drill bit
Art. 0648
Adjus. mortising bits z=3 with countersink
| Z=3 / 3 / HS | ||||
| Cod. | D | Reg. | Rot. | Att. |
| 001 | 10 | 25:-35 | Dx/RH | D=16X50 |
| 002 | 10 | 25:-35 | Sx/LH | D=16X50 |
| 003 | 12 | 25:-35 | Dx/RH | D=16X50 |
| 004 | 12 | 25:-35 | Sx/LH | D=16X50 |
| D=Maximum Diameter Reg.=Regulation in mm Rot.=Rotation sense Att.=Shank in mm | ||||
| INDICATE ROTATION SENSE WHEN ORDERING | ||||
| SPARE PARTS | |||||
| Cod. | Description | Rif. | Pos. | ||
| 0648 | 011 | bits | |||
| 0648 | 012 | bits | |||
| 0648 | 013 | bits | |||
| 0648 | 014 | bits | |||
| 0648 | 015 | countersink | |||
| 0648 | 016 | countersink | |||
| 0648 | 017 | countersink | |||
| 0648 | 018 | countersink | |||
Technical specification
mortise bits with 3 cutting edges,head and 10 mm. side grinded. Particularly recommended for medium depth buttonhole executions up to the total cutting lenght dimension with high feed-speed.The countersink allows the cleaning of the entrance of the buttonhole from possible chips of wood, creates a bevel that makes easier the assembling and also provides a space for the exceeding glue.HS(HSS) for non glued soft and hard wood.
Application
- Mortising machine
G3 di Fantacci Giancarlo & C. S.r.l.
Loc. Drove 7/A - 53036 Poggibonsi - Siena - Italy - Tel. +39 0577 981011 / 983386 Fax +39 0577 982520 - 
E-mail: g3fantacci@g3fantacci.com - Sito italiano - English site - Russian site
tnx.it - Siti Internet Poggibonsi - Siena