Accessories
- Art. 1005 - Copy ring set
- Art. 1010 - Locking clamps for pieces on models
- Art. 1015 - Tool holders
- Art. 1020 - Collet holders
- Art. 1021 - Collet holders
- Art. 1022 - Collet holders
- Art. 1023 - Collet holders
- Art. 1024 - Collet holders
- Art. 1025 - Collet holders
- Art. 1026 - Collet holders
- Art. 1030 - Collects er 25
- Art. 1035 - Nuts
- Art. 1040 - Pulling studs for collects
- Art. 1043 - Sleeves
- Art. 1044 - Locking nuts
- Art. 1045 - Reduction bushes with flange
- Art. 1046 - Cylindrical reduction bushes
- Art. 1047 - Reduction rings for saw blades
- Art. 1050 - Spacers rings
- Art. 1055 - Clamping wedges and counterwedges
- Art. 1056 - Clamping wedges for article 0360
- Art. 1057 - Wedges for radial clamping
- Art. 1058 - Wedges for front clamping
- Art. 1060 - Chamfering and radiousing insert holders
- Art. 1062 - Insert holders for tenon. cutter block
- Art. 1065 - Locking nuts for thin cutter blocks
- Art. 1070 - Cylindrical shank grub screw
- Art. 1071 - Conical shank grub screw
- Art. 1072 - Flared head screw with hexag. recess
- Art. 1073 - Flared head screw with hexag. recessand centring shank
- Art. 1074 - Flared head screw with slotted recess
- Art. 1075 - Convex head screw eith torx key
- Art. 1076 - Cylindrical head screw with torx key
- Art. 1077 - Slotted flange machine screw for insert location
- Art. 1078 - Conic head screw with hexagonal recess
- Art. 1079 - Convex head screw with hexagonal recess
- Art. 1080 - Cylindrical head screw with hexagonal recess
- Art. 1081 - Flared and torx head screw
- Art. 1085 - Hydro tools accessoires
- Art. 1090 - Allen
- Art. 1091 - Allen
- Art. 1092 - Allen
- Art. 1093 - Thumb torx key
- Art. 1094 - Torx key screwdriver
- Art. 1095 - Key wrench
- Art. 1096 - Special service key for lockingnuts
Products > Accessories > Art. 1015
Art. 1015
Tool holders
| Cod. | D | B | Rot. | Att. |
| 001 | 20 | 40 | Dx/RH | D=20 x 50 |
| 002 | 20 | 40 | Sx/LH | D=20 x 50 |
| 003 | 20 | 50 | Dx/RH | D=20 x 50 |
| 004 | 20 | 50 | Sx/LH | D=20 x 50 |
| 005 | 20 | 60 | Dx/RH | D=20 x 50 |
| 006 | 20 | 60 | Sx/LH | D=20 x 50 |
| 007 | 25 | 40 | Dx/RH | D=25x 50 |
| 008 | 25 | 40 | Sx/LH | D=25x 50 |
| 009 | 25 | 50 | Dx/RH | D=25x 50 |
| 010 | 25 | 50 | Sx/LH | D=25x 50 |
| 011 | 25 | 60 | Dx/RH | D=25x 50 |
| 012 | 25 | 60 | Sx/LH | D=25x 50 |
| 013 | 20 | 40 | Dx/RH | CM2 M30 x 1,5 |
| 014 | 20 | 40 | Sx/LH | CM2 M30 x 1,5 |
| 015 | 20 | 50 | Dx/RH | CM2 M30 x 1,5 |
| 016 | 20 | 50 | Sx/LH | CM2 M30 x 1,5 |
| 017 | 20 | 60 | Dx/RH | CM2 M30 x 1,5 |
| 018 | 20 | 60 | Sx/LH | CM2 M30 x 1,5 |
| 019 | 25 | 40 | Dx/RH | CM2 M30 x 1,5 |
| 020 | 25 | 40 | Sx/LH | CM2 M30 x 1,5 |
| 021 | 25 | 50 | Dx/RH | CM2 M30 x 1,5 |
| 022 | 25 | 50 | Sx/LH | CM2 M30 x 1,5 |
| 023 | 25 | 60 | Dx/RH | CM2 M30 x 1,5 |
| 024 | 25 | 60 | Sx/LH | CM2 M30 x 1,5 |
Technical specification
High resistence stell made.totally refaced surfaces.
Application
- Spindle moulder
G3 di Fantacci Giancarlo & C. S.r.l.
Loc. Drove 7/A - 53036 Poggibonsi - Siena - Italy - Tel. +39 0577 981011 / 983386 Fax +39 0577 982520 - 
E-mail: g3fantacci@g3fantacci.com - Sito italiano - English site - Russian site - 首页
P.I. e C.F. IT 00864380522 - C.C.I.A.A. SI 96614 - Vol. 11432 - Cap.Soc.€ 90.000 Int.Vers.
tnx.it - Siti Internet Poggibonsi - Siena