柄刀
- Art. 0400 - Router bits with cylindrical shank to drill and edge
- Art. 0403 - Router bits with cylindrical shank to drill and edge
- Art. 0405 - Router bits with morse-coneshank to drill and edge
- Art. 0410 - Multicut spiral router bits to drill and edge
- Art. 0415 - Multicut spiral router bits to edge
- Art. 0420 - Hw (integral tungsten carbide) helical router bits z=1
- Art. 0423 - Hw (integral tungsten carbide) helical router bits z=2
- Art. 0425 - Hw (integral tungsten carbide) helical router bits z=3
- Art. 0428 - Hw (integral tungsten carbide) helical router bits z=3 with chipbreaker
- Art. 0430 - Hw (integral tungsten carbide) helical router bits with pos. and neg. helix
- Art. 0435 - Hw (integral tungsten carbide) helical router bits for locks
- Art. 0440 - Profiled router bits for simple shapes
- Art. 0455 - Insert router cutters to drill and edge z=1 and z=1+1
- Art. 0460 - Insert router cutters to drill and edge z=2+1
- Art. 0465 - Insert router cutters to edge z=2 e z=2+2 ri
- Art. 0470 - Vari-angle bevelling insert router cutters
- Art. 0472 - Insert helical router cutters
- Art. 0475 - Insert router cutters simple shapes z=2
- Art. 0482 - Panel rising insert router cutters
- Art. 0485 - Multiprofile insert router cutters
- Art. 0490 - Insert router cutter set for solid wood door exec.
- Art. 0495 - Insert router cutter set for m.d.f. door exec.
- Art. 0497 - Insert router cutter set for doors execution
Art. 0497
Insert router cutter set for doors execution
| BITS FOR ROUGHING OPERATIONS | |||
| Cod. | D | Z | rif |
| 001 | 20 | 3r | 1 |
| INSERT RIGHT JOINT CUTTER | |||
| Cod. | D | Z | rif |
| 002 | 96 | 2 | 2 |
| INSERT LEFT JOINT CUTTER | |||
| Cod. | D | Z | rif |
| 003 | 96 | 2 | 3 |
| PROFILING CROSSPIECE ARCH DOOR WITH R/L | |||
| Cod. | D | Z | rif |
| 004 | 96 | 2+2 | 4 |
| PROFILING JAMBS AND CROSSPIECE WITH R/L | |||
| Cod. | D | Z | rif |
| 005 | 96 | 2+2 | 5 |
| PROFILING JAMBS AND CROSSPIECE WITHOUT R/L | |||
| Cod. | D | Z | rif |
| 006 | 96 | 2+2 | 6 |
| BIT FOR GLASS FIXING LATH REGAINING | |||
| Cod. | D | Z | rif |
| 007 | 8 | 2 | 7 |
| INSERT CUTTER FOR CROSSPIECES TENONING FOR R/L | |||
| Cod. | D | Z | rif |
| 008 | 96 | 2+2 | 8 |
| INSERT CUTTER FOR CROSSPIECES TENONING | |||
| Cod. | D | Z | rif |
| 009 | 96 | 2+2 | 9 |
| EXTERIOR EDGE DOOR SQUARING | |||
| Cod. | D | Z | rif |
| 010 | 96 | 2+2 | 10 |
| INSERT CUTTER FOR GASKET | |||
| Cod. | D | Z | rif |
| 011 | 160 | 4+4 | 11 |
| EXTERIOR PROFILE CROSSPIECE | |||
| Cod. | D | Z | rif |
| 012 | 96 | 2+4 | 12 |
| PANEL RISING EXECUTION | |||
| Cod. | D | Z | rif |
| 013 | 120 | 2 | 13 |
Technical specification
Set fo cutterheads to realise doors for CNC machines. Suitable for carve both soft and hardwoods. It can be assembled in a shank ISO30/ISO40 – HSK. This set is supplied with shank D. 20x50. Price without shank (ISO/HSK). This set is supplied with one profile at choice and permits to realize all wooden profiles showed in the page.
Application
- Router
G3 di Fantacci Giancarlo & C. S.r.l.
Loc. Drove 7/A - 53036 Poggibonsi - Siena - Italy - Tel. +39 0577 981011 / 983386 Fax +39 0577 982520 - 
E-mail: g3fantacci@g3fantacci.com - Sito italiano - English site - Russian site - 首页
P.I. e C.F. IT 00864380522 - C.C.I.A.A. SI 96614 - Vol. 11432 - Cap.Soc.€ 90.000 Int.Vers.
tnx.it - Siti Internet Poggibonsi - Siena